Saw blades are an integral tool for a carpenter that helps him in his job. When you have to perform any kind of cutting or finishing, your saw blades need to be sharp and smooth. When your blade is devoid of the sharpness, the job gets a lot more hectic and tougher for you. That’s why, the carpenters are very careful about buying their blades or marinating their sharpness.
When you need to cut metals, the use of cold saw blade is highly recommended. The clod saw utilizes a circular shape blade that is deemed as ideal for cutting the metals. As a worker, you must be careful about the selection of your blades to enhance your performance. But sometimes, it is all too tough and complex for you to work on all these aspects and get the best quality blades for you. In any such scenario, you can visit http://www.straightkerfs.com/category/sliding/ and have a look at some of the highly rated blades.
Things you can consider before buying your cold saw blade:
There are some major aspects you must be careful about while buying or replacing the blades in your cold saw blade. Here is a brief on some of them:
The most important thing that you shall be attentive to is the blade material. There are generally three types of materials you can look for depending upon you requirement. The high speed steel (HSS) is considered as the best material and is highly applauded by the cutters. The blade has a very high life span and that’s why preferred by the carpenters.
The other commonly used blade material is the tungsten carbide that is pretty economic and can do light or ordinary jobs. At the same time, it is also very fast when compared to the high speed steel but at the same time their durability is lower.
The thickness of the blade is a very important factor that helps you to decide upon its capability. The thicker amd stronger the blades are, the more potent they are in cutting down hard and tough objects. But when you have to go for sharp and sensitive cuts, the thin blades with a relatively low diameter are preferred. Generally, the thickness of the blades varies from 6 to 12 inches that you can choose for your job.
With the skip-tooth blades now available in the market there is quite confusion about the selection of standard tooth or the skip tooth. For the fragile material and cutting for general the purpose, the standard tooth design is preferred while for massive objects, the skip-tooth provides smooth and expedite cutting.
Pitch-rating is also an important factor that helps in deciding the efficiency of the saw blade. Generally, measured in terms of TPI (tooth per inch), most of the saw blades have a TPI ratio between 6 to 12, the more the TPI rating of the saw blade, the sharper are the cuts that you are going to receive form it.